Made on a Phone, Part 3 of 4. A short, practical series for high school and college filmmakers.
Here is a secret every working filmmaker knows: people will watch a film with so-so pictures, but they will click away from a film with bad sound. Echoes, wind, traffic and voices that are too quiet pull people right out of your story. The good news is that clean sound is mostly about distance and quiet, not expensive gear. A phone can record very good sound if the microphone is close to the person talking. Sound words you don’t know? Look them up in our Film Terms Glossary (sound terms).
Here is how to get clear sound on a phone shoot.
1. Get the Mic Close
Phone mic: best within arm’s length of the person talking
Wide shot problem: the phone is far away, so voices sound thin and echoey
Fix: record sound separately, close to the actor
The phone’s built-in mic is fine when it’s close. The trouble is your wide shots, where the phone is across the room. The closer the microphone is to the mouth, the more voice and the less room you record. Every tip below is a way to get the mic closer.
2. Use a Second Phone as a Sound Recorder
App: any voice recorder app (Voice Memos on iPhone, Recorder on Android)
Where: in the actor’s pocket, or just out of frame near them
Sync: clap once on camera at the start of each take
This is the best free trick in phone filmmaking. Borrow a second phone, start recording, and hide it close to your actor, under a pillow, behind a cup, in a jacket pocket. Clap your hands in front of the camera at the start of each take. In the edit, line up the spike of the clap with the frame where the hands meet, and your sound is in sync. That clap is what a slate does on a big set.
3. Add a Simple Microphone When You Can
Wired lav: a small clip-on mic that plugs into your phone (USB-C or Lightning)
Wireless clip-on kit: one mic on the actor, a receiver on the phone
Hide the lavalier: under a collar or shirt, taped so it doesn’t rub
If you buy one thing for phone filmmaking, make it a microphone, not a lens or a gimbal. A clip-on mic a few inches from the mouth sounds dramatically better than the phone across the room. Our article Choosing and Rigging Lavalier Microphones shows how the pros hide them.
4. Find (or Make) a Quiet Room
Turn off: fans, air conditioning, the fridge (and write a note to turn it back on)
Silence: phones, notifications, pets if you can
Soften: blankets, pillows and rugs cut echo in bare rooms
Before each scene, stand still and listen for ten seconds. You’ll hear hums you never noticed. Kill what you can. Bare rooms with hard walls bounce sound around and make voices sound hollow. Throw blankets over chairs just out of frame and put down a rug. A closet full of clothes is a great place to record voice-over.
5. Record Room Tone
What: 30 seconds of the room with everyone silent
When: at the end of each location, before you move
Why: the editor uses it to fill gaps so cuts sound smooth
Every room has its own quiet sound. When you cut between takes, the background can jump and the cut sounds rough. Thirty seconds of room tone lets you fill those holes. Say “room tone, everybody freeze” and record. It feels silly. Do it anyway.
6. Beat Wind and Traffic Outside
Wind: use a furry windscreen on your mic, or block wind with your body or a wall
Traffic: shoot between cars, or pick a quieter side street or park
Planes: wait. They always pass.
Wind hitting a mic makes a loud rumble you can’t fix later. Even a sock over a small mic helps in a pinch. Our article The Science of Microphone Windscreens explains why. If a loud sound covers a line, just do the take again while everyone is still there.
7. Listen with Headphones
Use: wired headphones (Bluetooth has a delay)
Check: is the voice clear, without crackle or distortion?
Play back: the first take of every scene before moving on
You can’t fix what you don’t hear. Plug in headphones and listen to your first take of each scene. If voices crackle when the actor gets loud, move the mic back a little. Catching a problem on set takes a minute. Finding it in the edit can cost you the scene.
Ready to try it? Our free 1-Minute Film Challenge is open now. This month’s theme is Light, and you can shoot it on your phone. Make a film of one minute or less and send it in before December 31, 2026. We would love to see your work.
Earn your Film Basics badge. Pass five beginner quiz challenges (Everyone Should Know, Camera, Lighting, Sound and Editorial terms) and a gold 🎬 Film Basics badge appears next to your name on your community profile.
Q: How can I get good audio when filming with my phone?
A: Get a microphone close to the person speaking. Use a clip-on mic, or record on a second phone hidden near the actor, and clap at the start of each take to sync in the edit.
Q: What is room tone and why do I need it?
A: Room tone is 30 seconds of a location with everyone silent. Editors use it to fill gaps between lines so cuts sound smooth instead of choppy.
Q: Is it worth buying a microphone for phone filmmaking?
A: Yes. A simple clip-on microphone is the single upgrade that improves a phone film the most, more than a lens or a gimbal.
In Conclusion
Clear sound comes from getting close and getting quiet. Use a second phone or a clip-on mic, kill the hums, record room tone and listen on headphones. Your audience may never notice good sound, and that is exactly the point. In Part 4 we keep your shots steady, no gimbal needed.
The Made on a Phone Series
Part 1: Camera Settings
Part 2: Light
Part 3: Sound (you are here)
Part 4: Steady Shots
Next series: Your First Film
Additional Resources
Microphone Techniques: Boom Mics and Lavalier
Choosing and Rigging Lavalier Microphones
Dual Channel Wireless Audio with Your iPhone or iPad
Video Microphones: Understanding Polar Patterns
Film Terms Glossary: Sound Terms
The 1-Minute Film Challenge








